References

  1. ANSI/API 526 7th Edition - Flanged Steel Pressure-relief Valves, 2017, published by American Petroleum Institute, 1220 L Street, NW, Washington DC, USA

  2. ANSI/API 610 11th Edition - Centrifugal Pumps for Petroleum, Petrochemical and Natural Gas Industries, 2010, published by American Petroleum Institute, 1220 L Street, NW, Washington DC, USA

  3. ANSI/HI Standard 6.1-6.5-2015, American National Standard for Reciprocating Power Pumps for Nomenclature, Definitions, Application, and Operation, 2015, published by American National Standards Institute, 6 Campus Drive, Parsippany, NJ, USA.

  4. ANSI/HI Standard 9.6.3-2017, Rotodynamic Pumps - Guidelines for Operating Regions, 2017, published by Hydraulic Institute, 6 Campus Drive, Parsippany, New Jersey, USA

  5. ANSI/HI Standard 9.6.7-2021, Rotodynamic Pumps - Guideline for Effects of Liquid Viscosity on Performance, 2021, published by Hydraulic Institute, 300 Interpace Parkway, Building A, 3rd Floor, Parsippany, New Jersey, USA

  6. ANSI/HI Standard 9.8-1998, American National Standard for Pump Intake Design, 1998, published by Hydraulic Institute, 6 Campus Drive, Parsippany, New Jersey, USA

  7. ANSI/HI Standard 12.1-12.6-2016, Rotodynamic (Centrifugal) Slurry Pumps, 2016,  published by Hydraulic Institute, 6 Campus Drive, Parsippany, New Jersey, USA

  8. ASME Press, ASME International Steam Tables for Industrial Use (CRTD-Vol. 58), published by the American Society of Mechanical Engineers, Three Park Avenue, New York, NY 10016

  9. Bloch, H. P., & Geitner, F. K. (1994). An Introduction to Machinery Reliability Assessment. Houston, Texas: Gulf Publishing Co.

  10. Brock, Pat D., Fire Protection Hydraulics and Water Supply Analysis, Third Edition, Fire Protection Publications Oklahoma State University, Copyright 2012 by the Board of Regents, Oklahoma State University.

  11. Crane Co., Flow of Fluids Through Valves, Fittings, and Pipe, Technical Paper No. 410, Crane Co., Joliet, IL, 1988.

  12. Darby, R., Chemical Engineering Fluid Mechanics, 2nd edition, Marcel Dekker, New York, NY, 2001.

  13. Eckert, E.R.G., and Drake, R., Analysis of Heat and Mass Transfer, McGraw-Hill, New York, NY, 1972.

  14. Garcia, E. and Steffe, J., "Comparison of Friction Factor Equations for Non-Newtonian Fluids in Pipe Flow," Journal of Food Process Engineering, Vol. 9, pp. 93-120, April 1986. [Online]. Available: https://doi.org/10.1111/j.1745-4530.1986.tb00120.x

  15. Idelchik, I. E., Handbook of Hydraulic Resistance, 4th edition, Begell House, Redding, CT, 2007.

  16. Ingersoll-Dresser Pumps, Cameron Hydraulic Data, Liberty Corner, NJ, 1995.

  17. Ito, H., "Friction factors for pipe flow," Journal of Basic Engineering, Vol. 81, pp. 123-126, 1959.

  18. Jeppson, R. W., Analysis of Flow in Pipe Networks, Ann Arbor Science Publishers, Ann Arbor, MI, 1976.

  19. Karassik I., Krutzsch W., Fraser W. and Messina J., Pump Handbook, 2nd edition, McGraw-Hill, New York, NY, 1986.

  20. Miller, D. S., Internal Flow Systems, 2nd edition, Gulf Publishing Company, Houston, TX, 1990.

  21. Mullineux, G., "Non-linear least squares fitting of coefficients in the Herschel-Bulkley model," Applied Mathematics Modeling, Vol. 32, Issue 12, pp. 2538-2551, Dec. 2008. [Online]. Available: https://www.sciencedirect.com/science/article/pii/S0307904X07002235

  22. Nayyar, M. L., Piping Handbook, 7th edition, McGraw-Hill, New York, NY, 2000.

  23. NFPA 13, Installation of Sprinkler Systems, 1999 Edition, page 13-139.

  24. NFPA 15, Standard for Water Spray Fixed Systems for Fire Protection, 2012 Edition.

  25. Pipe Line Rules of Thumb Handbook, Gulf Publishing, Houston, TX.

  26. TAPPI, Generalized method for determining the pipe friction loss of flowing pulp suspensions, TAPPI, TIS 0410-14, Atlanta, GA, 1988.

  27. Val-Matic Valve and Manufacturing Corp., "Surge Control in Pumping Systems," Val-Matic Valve and Manufacturing Corp., Elmhurst, IL, 2009.

  28. Walker, C. I., The effect of settling slurries on pump performance, undated, Warman International.

  29. Wilson, K.C., G.R. Addie, A. Sellgren and R. Clift, Slurry Transport Using Centrifugal Pumps, 3rd Ed., published by Springer, 2006.

  30. Wilson, K.C., “Effect of Solids Concentration on Deposit Velocity”, Journal of Pipelines, 5, 1986, pp. 251-257.

  31. D. Wood, T.W Walters, "Operational problems in pumping non-settling slurries resolved using an improved laminar pipe fitting loss model" in 28th Intern. Pump Users Symp., Houston Texas, Turbomachinery Laboratory, Texas A&M University, 2012

  32. Zipparro, V. J., and H, Hasen, editors, Davis’ Handbook of Applied Hydraulics, Fourth Edition, McGraw-Hill. New York, NY, 1993.