Arrange Menu

  • Primary Windows - Allows you to configure the Primary windows in two panes in a horizontal or vertical orientation. The primary windows can be further rearranged by dragging the tabs into the center of the screen and adjusted by moving the tab into the desired position in the docking guide (see Figure 1).

Figure 1: The Docking Guide can be used to view multiple primary window tabs at the same time

  • Sort Table By - (Output Only) - Allows user to order tables in order of any variable and in ascending or descending order.

  • Rotate Icon Right or Left - (Workspace Only) - Rotates icons for all selected junctions on the Workspace.

  • Auto-rotate Icon - (Workspace Only) - Rotates the selected icon(s) to align with the connected pipes if possible.

  • Rotate Selection Right or Left - (Workspace Only) - Rotates selected pipes and junctions as a group.

  • Align - (Workspace Only) - Aligns selected pipes and/or junctions on the Workspace. You can choose to align pipes and junctions, just pipes, or just junctions horizontally or vertically on the workspace.

  • Pipe Drawing Mode - (Workspace Only) - Select the type of grid layout that the model will use.

    • 2D Freeform - Junctions can be placed anywhere on the Workspace.

    • 2D Orthogonal - Toggles orthogonal drawing capability on the Workspace. This toggle is a shortcut to enabling the feature in User Options window.

    • Isometric - Uses an isometric grid.

  • Snap to Grid - (Workspace Only) - Available for 2D grids (on by default for isometric grid). Toggles Snap to Grid feature on the Workspace. When ON, all Workspace pipes, junctions and annotations snap to a grid specified in User Options window.

  • Show Grid - (Workspace Only) - Toggles Show Grid feature on the Workspace. Shows or hides grid that is specified in User Options window.

  • Make Selected Pipes and Jcts Orthogonal - (Workspace Only) - Makes all selected pipes and pipes connected to selected junctions on the Workspace orthogonal.

  • Flip Vertex - (Workspace Only) - Available when orthogonal drawing is enabled. This will flip the vertex of all selected pipes on the Workspace.

  • Scale/Flip Workspace - (Workspace Only) - Scales (shrinks or expands) or flips either selected or all pipes and junctions on the Workspace.

  • Set Pipe and Junction Locations to Parent - (Workspace Only) - Sets locations of pipe and junction labels to the same position as the parent scenario.

  • Reset Label Locations - (Workspace Only) - Sets locations of pipe and junction labels to their default locations.

  • Disable Pipes Snapping to Isometric Grid - (Workspace Only) - Toggles Snap to Grid feature on the Workspace for the selected pipe. When Snap to Grid is disabled for that pipe, the pipe end point no longer snaps to grid points and pipe segments do not follow the Isometric lines.

  • Add/Remove Segments - (Workspace Only) - Allows user to Add Segment (visual bend in pipe), Add Segment at Right Angle, Add Multiple Segments, Remove Segment, or Remove all Segments.

  • Lock Object - (Workspace Only) - Locks selected pipes and junctions on the Workspace so they cannot be moved. A lock symbol appears next to locked pipes or junctions when an attempt is made to move the pipe or junction.

  • Reverse Direction - (Workspace Only) - Reverses the reference positive flow direction of all selected pipes on the Workspace.

Related Topics

Workspace Window

Model Data Window

Output Window

Graph Results Window

Menus and Toolbars